IWC Yacht Club 811AD Blue Mable Dial
Tax Excluded
表示価格は税込み
Brand: IWC
Model: Yacht Club
Ref: 811AD
Serial: 188xxxx
Year: 1967
Movement: Automatic Cal.8541B
Case: 36mm
Material: Stainless Steel
Lug Width: 18mm
Water Resistance: None
Includes: Genuine Bracelet (Gay-Freres)
Bracelet Length: ~17.5cm
【Description】
IWCのヴィンテージにおける代表モデルの一つ、ヨットクラブ。
現在ではポルトギーゼラインの1つとして、スポーツウォッチに属しています。
ヴィンテージのヨットクラブは使い勝手の良いサイズ感、どんな格好やシチェーションでも違和感の無いシンプルなデザインが魅力です。
シンプルを極めたこのヨットクラブのケースデザインはジェラルド・ジェンタ。
オメガのCラインケースに近い、シャツに引っ掛からないデザインは余計なものを削ぎ落としながらも、独特の「艶」や「色気」が感じられます。
リューズは当時の防水ケースを示す、魚マークのリューズです。
そしてこの時計の最大の特徴はブルーマーブル模様のダイアルです。
非常に希少な文字盤で、ブルーのマーブルの他にグリーンのマーブルが存在しています。
マーブル柄だけを見ると少し目立つかな？と思うかもしれませんが、色合いや明るさ・インデックスを含め主張し過ぎないデザインですので悪目立ちはしないと思います。
カレンダー部分も同様の仕上げというのがこだわりが垣間見えます。
搭載ムーブメントは自動巻きのCal.8541B。
Cal.854をベースにデイト表示を加えたCal.8541の改良版です。
ムーブメントも効率よくゼンマイを巻き上げ、ヴィンテージの中でも故障も少ないということでかなり信頼性の高いペラトン式。
ペラトン式とは1950年代にIWCの設計部長だった時計師のアルバート・ペラトンによって開発された自動巻き機構のこと。
初めて開発されたCal.85から最終型のCal.854まで基本的な設計は同じというほど完成された機械の最終形です。
ゲイフレアー社製の純正ブレスレットが付属します。(17.5cm程度まで対応可能)
ゲイフレアー(Gay-Freres)はロレックスの初代ブレスレットのサプライヤーで、オーデマ ピゲのロイヤルオークやゼニス エル・プリメロのブレスレットを手掛けたメーカーとして知られています。
ドイツ国境に近いシャフハウゼンに本拠地を置くIWCならではの質実剛健さ、ジェラルド・ジェンタによる美しく実用的なデザインが共存した1本です。
リューズ付近のケース下部分に１ヶ所小さなアタリがあります。目立つものでは無いのでそこまで気にならないかと思います。
【Warranty】
※現在、日差 ±2秒とかなり調子は良いですが、安心してお使い頂けるようにオーバーホールをした後のお渡しとなります。
ご注文後、約4週間後のお渡し予定です。
オーバーホール後、1年保証となります。
【Description】
The Yacht Club is one of the flagship models of IWC’s vintage.
Today, the Yacht Club is part of the Portuguese line of sports watches.
The vintage Yacht Club is an attractive timepiece with a handy size and a simple design that makes it suitable for any outfit or situation.
The case design of this yacht club, which is the ultimate in simplicity, is by Gerald Genta.
The design of this watch is similar to Omega’s C-line case, which does not get caught on the shirt, and it has a unique “luster” and “sex appeal”.
The crown is a fish-marked crown, indicating the water-resistant case of the time.
The most distinctive feature of this watch is the blue marble dial.
It is a very rare dial, and in addition to the blue marble, there is also a green marble.
There is a little bit of military like camo pattern, but the design is not too assertive, including the indexes, so it won’t stand out.
It is glimpsed that the calendar part is finished in the same way, too.
The movement is Cal.8541B with automatic winding.
It is the improved version of Cal.8541 that added the date display based on Cal.854.
The Pellaton movement is also very reliable because it winds the spring efficiently and has few failures among the vintage models.
The Pellaton system is a self-winding mechanism developed in the 1950s by Albert Pellaton, a watchmaker who was the head of IWC’s design department.
It is the final form of a perfected mechanical system, so perfected that the basic design is the same from the first cal. 85 to the final cal. 854.
The watch comes with a genuine Gayflare bracelet. (It can accommodate up to about 17 cm.)
Gay-Freres was the supplier of the first Rolex bracelet and is best known as the maker of the Audemars Piguet Royal Oak and Zenith El Primero bracelets.
It combines the robustness of the Schaffhausen-based company near the German border with the beautiful and practical designs of Gerald Genta.
There is a small bruise on the lower part of the case near the crown. It’s not very noticeable, so it’s not that bad.
【Warranty】
The watch would be completely serviced by our watchmaker after your order.
It takes about 4 weeks to complete. It comes with 1-year warranty.
[About Leather Strap]
Due to Washington Convention, we cannot export Crocodile/Alligator/Lizard leather overseas.
We will replace the strap with a similar strap made of calf leather as an alternative.
Or we will send the watch without strap if we don't have stocks of them.
[Payment Method]
1. Credit Card (Visa/Master/Amex)
2 Wire/Bank Transfer
*Some items are only available by Bank Transfer.
*We have U.S/Singapore/EU/UK bank account. So you don't need to transfer internationaly.
[Delivery]
Shipped via DHL Express with full value insurance.
Normally,Item will be shipped in 1-2 business days after payment received.
Tracking number will be provided, and insurance will cover if the item is damaged or missing in the shipping process.
[Custom Duty]
International buyer has a responsibility to pay import duties, taxes or charges. (ex VAT/GST)
We do not accept to declare lower value on shipping label or invoice.We will declare full value of them.
If you would like to know how much it will be, please check approximate cost below.
Import Duty Calculator - SimplyDuty
These costs normally collected by courier when you pick up item or after your receive.
[Return]
We accept return in the case of shipping mistake or item defect in 14 days after your receive.
1.Can I reserve it?
-Since it is also sold on the web, it cannot be reserved.
2.Can you adjust the bracelet?
-If you fill in the approximate arm circumference when ordering, we will send it after adjustment.
(*Riveted bracelets and folded link bracelets require some time to be adjusted by a repair craftsman.)
3. How long does it take for "delivery after complete service?
-Please consider it to be about 1 month from the date of your order.
(*It may take a little longer depending on the schedule of our watchmaker and the degree of congestion.)
4.Is there a payment deadline? (Bank transfer)
-If we cannot confirm the payment within 2 days after placing the order, the order will be canceled.
5.Can I order by cash on delivery?
- Due to the nature of the product, we do not accept it.
Our stance is that "customers can use good products with peace of mind for a long time."
In order to achieve this, the presence of a skilled repair craftsman is essential.
How well the work is done depends largely on the thoughts of the craftsman.
The watchmakers who Arbitro asks are craftsmen who do not cut corners in such areas, so we ask them to carry out the repair work with peace of mind.
About Complete Service
Complete service, sometime called overhaul is the work of disassembling a mechanical product down to its individual parts, cleaning and reassembling it to bring it closer to its new state of performance.
Roughly speaking, the overhaul procedure is as follows.
1. Separate into case and movement
2. Disassemble the movement
3. Inspection and pre-cleaning of wear condition of each part
4. Wash parts with a special machine
5. Lubrication and assembly
6. Waterproof test
7. Final adjustment and running test.
Some movements are made up of hundreds of parts, but it is a very meticulous process of disassembling them one by one, inspecting them all, cleaning them, and reassembling them.
If you don't overhaul, the oil will deteriorate just like a car, and the risk of wear and damage to parts increases, causing a decrease in accuracy and, in severe cases, not working.
There is also the reason that it will be very expensive to replace parts after they are found to be damaged, so we recommend overhauling once every 2-3 years for economical and long-term use.
About Polishing
Vintage watches have been used for decades, and even the stainless steel used in many watches has rounded corners that were originally sharp, and has many small scratches even though the mirror finish should be beautiful. state.
At Arbitro, some watches are sold with a new finish, based on the idea that you can purchase them in beautiful condition and use them for a long time.
In particular, gold-cased dress watches are finished to bring out the best of the precious metal case.
The watches sold by us that have been given a new finish are shot in very high definition, so you can see that the edges stand out and the light is reflected by the mirror finish.
Also, depending on the case or bracelet, there are cases where multiple finishes such as mirror finish and hairline finish are mixed, but there are not many craftsmen who can distinguish between them and finish them at a high level.
In addition, the “thinness of the case” is also a part that is greatly influenced by the skill of the craftsman.
A watch that has become thinner and has thinner lugs is far from its original design, and the appearance becomes unbalanced.
It is a very precise work that brings the case closer to the original finish by eliminating scratches and dents while reducing the thickness of the case to the utmost limit.
Of course, there are cases where it is better to use the watch as it is, in order to emphasize the history of the watch and its original condition.
We look at each watch and judge whether it is best to finish it before selling it.
Choose options
Tax Excluded