CITIZEN Crystron 150m Diver 1980s
Tax Excluded
ソード型の大振りな時針が特徴的なシチズンのヴィンテージダイバーです。
「クリストロン」は1970年代のシチズンのクォーツ時計に付けられた名称で、様々なモデルが販売されていました。この時計はクリストロンの150m防水仕様の本格的なダイバーウォッチとして生産されました。
セイコーダイバーの人気から、シチズンのダイバーウォッチも徐々に注目され始めています。特に自動巻きの「チャレンジダイバー」はこういった逸話があり、特に人気があります。
『1983年、オーストラリアのロングリーフビーチで発見された、CITIZENの自動巻きダイバーズウォッチ「チャレンジダイバー」。海底で発見されたときにはフジツボで覆われながらも、なんと波の揺れでゼンマイが巻かれ、時を刻み続けていました。』
自動巻きのものは中々のお値段がしますが、クォーツはまだそこまでには至っておらず手が出しやすいレンジです。この時計の大きな特徴は大きなソード型の時針では無いでしょうか。ベンツ針や矢印の形状が多い中で、この形はインパクトがあります。
ケースサイズは42mmですが、リューズガードまで計測した際の値ですので実際にはベゼル径の40mmぐらいのサイズ感です。同じ42mmのセイコーの7548ダイバーより小さく感じます。
ガラスにスレこそあるものの、全体的なコンディションも非常に良く、ヴィンテージダイバーの1本目として非常におすすめの時計です。
オーバーホール済み。オーバーホール時に電池交換済み、各部のパッキン交換済みです。6ヶ月保証となります。
-Specifications
Brand: CITIZEN
Model: Crystron 150m Diver
Ref: 4-732308TA
Year: 1980
Movement: Quartz Cal.7548
Case: 42mm (Without Crown)
Material: Stainless Steel
Lug Width: 20mm
Includes: Wind Velocity Rubber Strap
【Description】
The name “Crystolon” was given to Citizen’s quartz watches in the 1970s, and various models.
This watch was produced as a professional diver’s watch that was water resistant to 150 meters.
Due to the popularity of Seiko Diver, Citizen’s diver watches are gradually beginning to attract attention.
The self-winding “Challenge Diver” is especially popular because of this anecdote.
“In 1983, CITIZEN’s automatic diver’s watch “Challenge Diver” was discovered at Long Reef Beach in Australia.
It was covered with barnacles when it was found at the bottom of the ocean, but to my surprise, the spring was wound by the waves and kept ticking.”
The automatic ones are moderately priced, but the quartz ones are not quite there yet and are in an affordable range.
The big feature of this watch is probably the large sword-shaped hour hand. While most of the hands are in the shape of mercedes or arrows, this shape has a great impact.
The case size is 42mm, but this is the value when measured up to the crown guard, so the actual size is about 40mm in bezel diameter.
It feels smaller than Seiko’s 7548 Diver, which is also 42mm.
【Warranty】
The watch wast completely serviced before listing.
Battery and all gaskets are replaced in the service.
It comes with 6 months warranty.
[About Leather Strap]
Due to Washington Convention, we cannot export Crocodile/Alligator/Lizard leather overseas.
We will replace the strap with a similar strap made of calf leather as an alternative.
Or we will send the watch without strap if we don't have stocks of them.
[Payment Method]
1. Credit Card (Visa/Master/Amex)
2 Wire/Bank Transfer
*Some items are only available by Bank Transfer.
*We have U.S/Singapore/EU/UK bank account. So you don't need to transfer internationaly.
[Delivery]
Shipped via DHL Express with full value insurance.
Normally,Item will be shipped in 1-2 business days after payment received.
Tracking number will be provided, and insurance will cover if the item is damaged or missing in the shipping process.
[Custom Duty]
International buyer has a responsibility to pay import duties, taxes or charges. (ex VAT/GST)
We do not accept to declare lower value on shipping label or invoice.We will declare full value of them.
If you would like to know how much it will be, please check approximate cost below.
Import Duty Calculator - SimplyDuty
These costs normally collected by courier when you pick up item or after your receive.
[Return]
We accept return in the case of shipping mistake or item defect in 14 days after your receive.
1.Can I reserve it?
-Since it is also sold on the web, it cannot be reserved.
2.Can you adjust the bracelet?
-If you fill in the approximate arm circumference when ordering, we will send it after adjustment.
(*Riveted bracelets and folded link bracelets require some time to be adjusted by a repair craftsman.)
3. How long does it take for "delivery after complete service?
-Please consider it to be about 1 month from the date of your order.
(*It may take a little longer depending on the schedule of our watchmaker and the degree of congestion.)
4.Is there a payment deadline? (Bank transfer)
-If we cannot confirm the payment within 2 days after placing the order, the order will be canceled.
5.Can I order by cash on delivery?
- Due to the nature of the product, we do not accept it.
Our stance is that "customers can use good products with peace of mind for a long time."
In order to achieve this, the presence of a skilled repair craftsman is essential.
How well the work is done depends largely on the thoughts of the craftsman.
The watchmakers who Arbitro asks are craftsmen who do not cut corners in such areas, so we ask them to carry out the repair work with peace of mind.
About Complete Service
Complete service, sometime called overhaul is the work of disassembling a mechanical product down to its individual parts, cleaning and reassembling it to bring it closer to its new state of performance.
Roughly speaking, the overhaul procedure is as follows.
1. Separate into case and movement
2. Disassemble the movement
3. Inspection and pre-cleaning of wear condition of each part
4. Wash parts with a special machine
5. Lubrication and assembly
6. Waterproof test
7. Final adjustment and running test.
Some movements are made up of hundreds of parts, but it is a very meticulous process of disassembling them one by one, inspecting them all, cleaning them, and reassembling them.
If you don't overhaul, the oil will deteriorate just like a car, and the risk of wear and damage to parts increases, causing a decrease in accuracy and, in severe cases, not working.
There is also the reason that it will be very expensive to replace parts after they are found to be damaged, so we recommend overhauling once every 2-3 years for economical and long-term use.
About Polishing
Vintage watches have been used for decades, and even the stainless steel used in many watches has rounded corners that were originally sharp, and has many small scratches even though the mirror finish should be beautiful. state.
At Arbitro, some watches are sold with a new finish, based on the idea that you can purchase them in beautiful condition and use them for a long time.
In particular, gold-cased dress watches are finished to bring out the best of the precious metal case.
The watches sold by us that have been given a new finish are shot in very high definition, so you can see that the edges stand out and the light is reflected by the mirror finish.
Also, depending on the case or bracelet, there are cases where multiple finishes such as mirror finish and hairline finish are mixed, but there are not many craftsmen who can distinguish between them and finish them at a high level.
In addition, the “thinness of the case” is also a part that is greatly influenced by the skill of the craftsman.
A watch that has become thinner and has thinner lugs is far from its original design, and the appearance becomes unbalanced.
It is a very precise work that brings the case closer to the original finish by eliminating scratches and dents while reducing the thickness of the case to the utmost limit.
Of course, there are cases where it is better to use the watch as it is, in order to emphasize the history of the watch and its original condition.
We look at each watch and judge whether it is best to finish it before selling it.
Choose options